Hooked up the Chiller, Blower and Extractor… Filled the Chiller with water….. ran the earth wire outside and drove a copper earthing rod into the ground about a metre…

Turn on the power, turned the key to the ON position…… nothing…Had the emergency off  switch set… twisted it and voile…. it is alive…

Only had a short time to play but did manage to cut a small arc on a bit of maple..

And now, it is the weekend and my life is taken over by the markets… Will have to make time on Monday to get CorelDraw and LaserCut 5.3 introduced… and then work out a quote to engrave Jim Beam Logos on some Wooden 2 litre Kegs… yes my first paying job with the Laser…It seems to be all happening at once…

About Lazy Larry

Just a woodworker sharing some of the things learnt the hard way... so you don't make the same mistakes...
This entry was posted in General, project, workshop and tagged , , , , , , , , . Bookmark the permalink.

3 Responses to It’s ALIVE

  1. Pete says:

    Can’t wait to see it in action! Have fun at the markets 😀

  2. Lew says:

    Things are really going GangBusters for you, Larry! Hope you take some time to sample the keg contents- Jim Beam is fine sippin’ wiskey

  3. yaakov says:

    Very cool!

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s